My Thrustmaster Panel

Hotfix

• Improvement with multiple USB Wheel rim handling

Hotfix

• Support new device

Hotfix

• T248R show in HOMEPAGE in any condition

New features

• Add Raceline LC support in USB
• Add Raceline LC support in DIO / RJ45 (with the T598 base only)
• Add Raceline LC user Journey with TTRS Drivers support
• Add EVO Levers Support
• Add Formula Wheel Add-On Ferrari SF25 Edition Support
• Add Formula Wheel Add-On Ferrari SF1000 Edition Firmware Update process

Improvements

• App behaving when outdated component is founded.
• Improved global firmware update process.
• GT Wheel add-on UI.
• Toast notification Rework.

Known issues

• Wheel Rims connected might not refresh until Wheel base is restarted while the app is open.
• UI – Can be incorrect in 4K with 200% Windows scale.
• My Thrustmaster Panel automatically reboots after firmware update.
• SF1000 Wheel Add On could be display instead of the attached wheel add on.
• SF25 can be show as SF1000 before Firmware update.
• SF1000 Firmware version is not showing.
• T598 – Can be shown with Firmware version 1.80 when no drivers are installed.
• T598X – Gear Jolt & Engine Roar can cause issue in the forcefeedback effect.
• SPORTCAR Wheel rims can show incorrect firmware version as 58.233.
• T248R Auto center Slider can be moved to 0% in certains conditions.
• Weblink are not localized.

Bug fixes

• SF1000 Wheel Add On flickering on HOMEPAGE screen.
• Various UI Fixes.
• Various Tooltips correction.

New features

• Add T818 7.39 Firmware Support: New Settings & Pattern lighting modes.
• Add Hypercar Wheel Add On firmware process & update support.

Improvements

• Reworked T818 Presets module.
• New UI for Links page.
• Improved presets prompt to handle T818 external settings changes.
• Improved notifications for available updates with connected devices.

Known issues

• Wheel Rims connected might not refresh until Wheel base is restarted while the app is open.
• UI – Can be incorrect in 4K with 200% Windows scale.
• My Thrustmaster Panel automatically reboots after firmware update.
• SF1000 Wheel Add On could be display instead of the attached wheel add on.
• T598 – Can be shown with Firmware version 1.80 when no drivers are installed.
• T248R Auto center Slider can be moved to 0% in certains conditions.
• Weblink are not localized.
• T598 wording is used instead of T818 for Wheel rim firmware update warning.

Bug fixes

• SF1000 Wheel Add On flickering on HOMEPAGE screen.
• Various UI Fixes.

Hotfix

• SPORTCAR Wheel Rim firmware update fix

New features

• Add T248R Support.
• Add T598 Xbox version Support.
• Add SPORTCAR Wheel Rim Firmware update support when connected to a T598 servo base.

Improvements

• New Settings categories page layout.
• New UI for Overview, Settings and Testing page.
• Improved Firmware update process when bootmode not correctly engaged.
• Improved notifications for available updates with connected devices.

Known issues

• Wheel Rims connected might not refresh until Wheel base is restarted while the app is open.
• UI – Can be incorrect in 4K with 200% Windows scale.
• My Thrustmaster Panel automatically reboots after firmware update.
• SF1000 Wheel Add On could be display instead of the attached wheel add on.
• T598 – Can be shown with Firmware version 1.80 when no drivers are installed.
• Weblink are not localized.
• T248R Auto center Slider can be moved to 0% in certains conditions.

Bug fixes

• T818 – Two device instead of one can be seen at first start-up of the app.
• Various UI Fixes.

Hotfix

• Firmware Recovery Update – Only the latest firmware available is now downloaded
• Firmware Update – Device Bootmode verification logic is improved to minimize waiting time
• Ferrari 488 GT3 & EVO racing HUB – Firmware Update now show properly the update progress.

New features

• Add T598 SETTINGS page.
• Add T818 Support.
• Add T818 Presets settings (D, 1, 2, 3).

Improvements

• New prompt to inform My Thrustmaster Panel will reboot after firmware update.
• New T598 HD illustration.
• New REFRESH prompt & logic on HOMEPAGE.
• New update logic flow as the Drivers is updated before the firmware.
• Updated TM Firmware updater.

Known issues

• UI – Can be incorrect in 4K with 200% Windows scale.
• My Thrustmaster Panel will automatically reboot after firmware update.
• SF1000 Wheel Add On could be display instead of the attached wheel add on.
• T598 – Can be shown with Firmware version 1.80 when no drivers are installed.
• T818 – Two device instead of one can be seen at first start-up of the app.
• Weblink are not localized.

Bug fixes

• EVO racing HUB – Update instructions are localized.
• EVO racing HUB – Support webpage link Added.
• Ferrari 488 GT3 – No longer display EVO racing HUB device.
• Hypercar Wheel Add On – Support webpage link Added.
• SF1000 Wheel Add On – Correct Firmware version is now showing.
• SF1000 Wheel Add On – App no longer close when use “Set center”.
• Ferrari F1 Wheel – Added button 18-19-20-21 on TESTING screen.
• T598 – In Blue mode and without any drivers install now only show 1 device.
• T598 – Buttons layout for TM Open Wheel Add On and Ferrari 488 Challenge add on in TESTING screen.
• It is impossible to cancel the checking for only 1 device right before performing a firmware update.
• The REFRESH button will update the FW Updater when a wheel is connected via USB.
• Various UI fixes.

New features

• Wheel Rims firmware update from My Thrustmaster Panel.
• Add Recovery Mode to open firmware updater from My Thrustmaster Panel.

Improvements

• Add firmware version verification in the Wheel Rim page.
• Add firmware Updater shortcut in the Wheel Rim update process.
• Possibility to see device in bootmode in the HOMEPAGE.

Known issues

• My Thrustmaster Panel will automatically reboot after firmware update.
• Device are shown in the HOMEPAGE only after hitting “REFRESH” button.
• Weblink are not localized.
• SF1000 Wheel is shown randomly instead of the correct wheel add on.
• SF1000 Wheel Add On firmware version is not showing or incorrect value.
• Ferrari F1 Wheel: Missing button 18-19-20-21 on Testing Tab.
• Hypercar Wheel Add On don’t have support webpage link.
• Extra EVO Racing HUB can be displayed when plugging the USB cable into Ferrari 488 GT3 or Evo Racing Addon.
• EVO racing HUB update instructions are not localized.
• EVO racing HUB don’t have support webpage link.
• The refresh button will update the FW Updater when a wheel is connected via USB.
• UI – When in TESTING page and connecting a ID shared wheel Rim (ID=4) all wheels are displayed.
• UI – can be incorrect in 4K with 200% Windows scale.
• T598 – Visual error appearing when booting the title with no drivers for a very short moments.
• T598 – Minor issue with the buttons layout for TM Open Wheel and Ferrari 488 Challenge addons in Testing Page.
• T598 – Can be shown with incoherent Firmware version 1.80 when no drivers are installed.
• T598 – Settings are not yet adjustable in My Thrustmaster Panel.
• T598 – in blue mode and without any drivers install can show 2 unknown devices instead of 1.

Bug fixes

• Firmware Updater fix that prevent to update T598 for some users.
• Firmware Updater fix that return “Oops somethings went wrong!”
• Removed T818 support as it is not supported correctly in this app. BETA version must still be use for T818.
• Various UI fixes.
• Localized all the contents.

Known issues

• T598 Settings are not yet adjustable in My Thrustmaster Panel.
• SF1000 wheel is shown randomly instead of the correct wheel add on.
• My Thrustmaster Panel may not re-open right after closing it.
• My Thrustmaster Panel will automatically reboot after firmware update.
• When using the “SET CENTER” feature, the value display may be -1° instead of 0°.
• T598 can be shown with incoherent Firmware version 1.80 when no drivers are installed.
• Device are shown in the HOMEPAGE only after hitting “REFRESH” button
• In some configuration, the TESTING page may close the app
• “Coming Soon!” message is not localized.
• Double click on “REFRESH” close the app.
• Unable to start again the app shortly after closing it.
• With T598 in blue mode and without any drivers install can show 2 unknown devices instead of 1.
• Weblink are not localized.
• Wheel rims version show no icon once up to date.
• SF1000 Wheel Add On firmware version is not showing or incorrect value.
• 488 GT3 Wheel Add On update instructions are not localized.
• Hypercar Wheel Add On update instructions are not localized.
• Hypercar Wheel Add On don’t have support webpage link.
• EVO racing Hub update instructions are not localized.
• EVO racing Hub don’t have support webpage link.